Table of Contents

Redis

This connector simplifies using a Microsoft RedisCache or a StackExchange IConnectionMultiplexer.

The following Steeltoe sample applications are available to help you understand how to use this connector:

  • DataProtection: A sample application showing how to use the Steeltoe DataProtection Key Storage Provider for Redis.
  • MusicStore: A sample application showing how to use all of the Steeltoe components together in an ASP.NET Core application. This is a microservices-based application built from the MusicStore ASP.NET Core reference application provided by Microsoft.

This connector provides an IHealthContributor, which you can use in conjunction with the Steeltoe Management Health check endpoint.

Usage

You should know how the .NET configuration service works before starting to use the connector. To configure the connector, you need a basic understanding of the ConfigurationBuilder and how to add providers to the builder.

You should also know how the ASP.NET Core Startup class is used in configuring the application services for the application. Pay particular attention to the usage of the ConfigureServices() method.

You probably want some understanding of how to use the RedisCache or IConnectionMultiplexer before starting to use this connector.

To use this connector:

  1. Create a Redis Service instance and bind it to your application.
  2. Optionally, configure any Redis client settings (for example, in appsettings.json).
  3. Optionally, add the Steeltoe Cloud Foundry config provider to your ConfigurationBuilder.
  4. Add DistributedRedisCache or ConnectionMultiplexer to your ServiceCollection.

The Microsoft wrapper for the Stack Exchange Redis client depends on Lua commands EVAL and/or EVALSHA. Lua scripting is disabled by default in many Redis tile installations on the TAS Platform. If you encounter a message similar to StackExchange.Redis.RedisServerException: ERR unknown command EVALSHA, you need to either have Lua scripting enabled by a platform operator or try using the ConnectionMultiplexer instead of the IDistributedCache or RedisCache interfaces provided by Microsoft.

Add NuGet Reference

To use the Redis connector, you need to add a reference to the appropriate Steeltoe Connector NuGet package and a reference to Microsoft.Extensions.Caching.Redis, Microsoft.Extensions.Caching.StackExchangeRedis, StackExchange.Redis, or StackExchange.Redis.StrongName.

Because Microsoft.Extensions.Caching.Redis depends on StackExchange.Redis.StrongName, adding a reference to the Microsoft library also enables access to the StackExchange classes, as seen in the sample application.

Configure Settings

The connector supports several settings for the Redis connection that can be useful when you are developing and testing an application locally and you need to have the connector configure the connection for non-default settings.

The following example of the connector's configuration in JSON shows how to set up a connection to a Redis server at https://foo.bar:1111:

{
  ...
  "Redis": {
    "Client": {
      "Host": "https://foo.bar",
      "Port": 1111
    }
  }
  ...
}

The following table table describes all possible settings for the connector

Key Description Default
Host Hostname or IP Address of the server. localhost
Port Port number of the server. 6379
EndPoints Comma-separated list of host:port pairs. not set
ClientName Identification for the connection within Redis. not set
ConnectRetry Times to repeat initial connect attempts. 3
ConnectTimeout Timeout (ms) for connect operations. 5000
AbortOnConnectFail Does not create a connection while no servers are available. true
KeepAlive Time (seconds) at which to send a message to help keep sockets alive. -1
ResolveDns Whether DNS resolution should be explicit and eager, rather than implicit. false
Ssl Whether SSL encryption should be used. false
SslHost Enforces a particular SSL host identity on the server's certificate. not set
WriteBuffer Size of the output buffer. 4096
ConnectionString Full connection string. Built from settings
InstanceId Cache ID. Used only with IDistributedCache. not set

IMPORTANT: All of these settings should be prefixed with Redis:Client:.

The samples and most templates are already set up to read from appsettings.json.

If a ConnectionString is provided and VCAP_SERVICES are not detected (a typical scenario for local application development), the ConnectionString is used exactly as provided.

Cloud Foundry

To use Redis on Cloud Foundry, create and bind an instance to your application by using the Cloud Foundry CLI:

# Create Redis service
cf create-service p-redis shared-vm myRedisCache

# Bind service to `myApp`
cf bind-service myApp myRedisCache

# Restage the app to pick up change
cf restage myApp

The preceding commands assume you use the Redis service provided by TAS. If you use a different service, you have to adjust the create-service command to fit your environment.

This connector also works with the Cloud Service Broker.

Once the service is bound to your application, the connector's settings are available in VCAP_SERVICES.

Add IDistributedCache

To use Microsoft's IDistributedCache in your application, add it to the service container:

using Steeltoe.Connector.Redis;
public class Startup {
    public IConfiguration Configuration { get; private set; }
    public Startup()
    {
    }
    public void ConfigureServices(IServiceCollection services)
    {
        // Add Microsoft Redis Cache (IDistributedCache)
        services.AddDistributedRedisCache(Configuration);

        // Add framework services
        services.AddMvc();
    }
}

The AddDistributedRedisCache(Configuration) method call configures the IDistributedCache by using the configuration built by the application earlier and adds the connection to the service container.

Use IDistributedCache

The following example shows how to inject and use the IDistributedCache in a controller once it has been added to the service container:

using Microsoft.Extensions.Caching.Distributed;
...
public class HomeController : Controller
{
    private IDistributedCache _cache;
    public HomeController(IDistributedCache cache)
    {
        _cache = cache;
    }
    ...
    public IActionResult CacheData()
    {
        string key1 = Encoding.Default.GetString(_cache.Get("Key1"));
        string key2 = Encoding.Default.GetString(_cache.Get("Key2"));

        ViewData["Key1"] = key1;
        ViewData["Key2"] = key2;

        return View();
    }
}

Add IConnectionMultiplexer

To use a StackExchange IConnectionMultiplexer in your application directly, add it to the service container in the ConfigureServices() method of the Startup class:

using Steeltoe.Connector.Redis;

public class Startup {
   ...
   public IConfiguration Configuration { get; private set; }
   public Startup(...)
   {
     ...
   }
   public void ConfigureServices(IServiceCollection services)
   {
       // Add StackExchange IConnectionMultiplexer
       services.AddRedisConnectionMultiplexer(Configuration);

       // Add framework services
       services.AddMvc();
       ...
   }
   ...
}

The AddRedisConnectionMultiplexer(Configuration) method call configures the IConnectionMultiplexer by using the configuration built by the application and adds the connection to the service container.

If necessary, you can use both IDistributedCache and IConnectionMultiplexer in your application.

Use IConnectionMultiplexer

Once you have configured and added the IConnectionMultiplexer to the service container, you can inject it and use it in a controller or a view:

using Microsoft.Extensions.Caching.Distributed;
...
public class HomeController : Controller
{
    private IConnectionMultiplexer _conn;
    public HomeController(IConnectionMultiplexer conn)
    {
        _conn = conn;
    }
    ...
    public IActionResult ConnData()
    {
        IDatabase db = _conn.GetDatabase();

        string key1 = db.StringGet("ConnectionMultiplexerKey1");
        string key2 = db.StringGet("ConnectionMultiplexerKey2");

        ViewData["ConnectionMultiplexerKey1"] = key1;
        ViewData["ConnectionMultiplexerKey2"] = key2;

        return View();
    }
}
Edit this page